Technology
The Biogreen system is fortified with fast-acting, proven, environmentally friendly organic agents that biodegrade waste. Safe natural agents are introduced into the anaerobic and aerobic modules, eliminating unpleasant odours, liquefying residual sludge and destroying pathogens. Oxygen enters the secondary segments without expensive mechanical methods, and sterilization is achieved naturally.
Fortified Primary Treatment Module
Fortified Distribution Module
Fortified Aerated Filter Module
UV Tank
Sampling point A is the inlet; sampling point B is the discharge. Both allow independent verification of treatment performance.
Clarifies grey water, biodegrades organic oils and grease, and reduces scum formation in the treatment system.
Where biodegradation and initial treatment of blackwater takes place.
The point of integration between blackwater and greywater.
Combines biodegradation and mechanical filtration in one unit.
Ultraviolet sterilization as the final barrier before discharge or reuse.
The Biogreen Waste Water Treatment System is scientifically tested and proven to meet all set-out environmental standards, evidenced by test results from a NEMA-approved lab. It is one of only a few systems approved and listed by the National Environment Management Authority for wastewater management.
Request test results